原来 Abaqus 用 Licence 的数量是这么算的

刚在 Leeds 大学的网页看到的描述,在计算中心的设备上运行 Abaqus 模拟任务的时候,使用的 Licence 跟任务分配使用的核心数有关,而且不是线性关系。这对于购买和使用 Abaqus 的许可证很有参考价值。

下面是引用,来自 Leeds 大学高性能计算中心网页

Licence Management

Abaqus is a licensed application with a limited number of license tokens. Running an Abaqus analysis requires more than one token. The number of tokens needed (T) is given by the formula T = int(5 x N^0.422) where N is the number of cpu cores. More simply, for common job sizes the numbers are:

| Number of cores | Tokens required |
| —— | —— |
|  1 |  5 |
|  4 |  8 |
|  8 | 12 |
| 12 | 14 |
| 16 | 16 |
| 24 | 19 |
| 32 | 21 |
| 64 | 28 |

所以运行模拟任务的时候需要考虑消耗的 Tokens 数量。

另外,该页面上还提到 Abaqus 利用多核心的效率的描述,

For information, Abaqus scales efficiently to 4 processors, relatively well to 8 processors but poorly further. Trying to run a job over more that 8 to 12 cpu cores won’t increase the performances (and running over more than the number of cpu core per node will even decrease the performance).

以及关于内存使用的描述,

<amount_of_RAM_abaqus> is the amount of memory Abaqus will devote to the solver. There are other memory overheads required by Abaqus. Thus, you will need to define <amount_of_RAM_abaqus> to be less than the total memory requested from the queues to allow for this. For instance if you request two cores at 2Gb each, then set memory=3000m for example, which would allow 1Gb for memory overheads.

这些问题以前都没有考虑过。©

本文发表于水景一页。永久链接:<https://cnzhx.net/fe/2017/04/06/abaqus-licence-management-info/>。转载请保留此信息及相应链接。

雁过留声,人过留名

您的电子邮箱地址不会被公开。 必填项已用 * 标注

特别提示:与当前文章主题无关的讨论相关但需要较多讨论求助信息请发布到水景一页讨论区的相应版块,谢谢您的理解与合作!请参考本站互助指南
您可以在评论中使用如下的 HTML 标记来辅助表达: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>